Last updated October 16, 2026
Seville is one of Gilbert's signature master-planned golf communities, built largely by Fulton Homes around the Seville Golf & Country Club out near Higley and Queen Creek Roads. The lots run larger than typical Gilbert infill, many back to the course or a greenbelt, and the homes are family-focused. This guide covers what we build in those backyards, how we clear the Seville HOA, and how we engineer for the local soil and sun.
What hardscape works best for a Seville golf-community backyard?
Seville's larger lots, many backing the golf course or a greenbelt, invite a full outdoor room rather than a single feature. The combination we build most here is an artificial turf lawn the kids and dogs can use year round, a paver or travertine patio off the back of the house, and a built-in outdoor kitchen for the long Arizona entertaining season. On golf-course-frontage lots we keep the plantings and structures low and sightlines open near the course, then place the gathering zones closer to the home. The two-story homes common in Seville throw useful afternoon shade we plan the seating around. If you already have a pool, we build the deck, coping and surrounds around it. To be clear on scope, we build the hardscape around your existing pool, not the pool itself.
Do I need HOA approval for hardscape in Seville, Gilbert?
Almost always, yes. Seville is governed by the Seville Community Association, and backyard changes like patios, shade structures, outdoor kitchens and turf typically go through architectural design review before any work begins. The review looks at materials, colors, heights, setbacks and drainage, so nothing sheds monsoon water onto a neighbor or the course. We prepare the submittal package with material specs, colors and a layout, then build to the approved plan so the project clears review the first time instead of stalling. Town of Gilbert permits for gas, electrical and certain structures are handled the same way, as part of the job.
How do you build turf and pavers for Gilbert's soil and monsoons?
Southeast Gilbert sits on caliche, the cement-hard calcium layer that sheds water instead of soaking it in, so monsoon storms move the ground under any rigid surface. That is why we build base-first: a compacted aggregate base graded to drain under both turf and pavers, a permeable turf backing so storm water passes straight through, and polymeric-sanded, edge-restrained paver fields that flex and settle instead of cracking like a poured slab. Everything is UV-rated for the Zone 9b sun that bleaches cheap turf and concrete tint within a couple of seasons. The ranges below are directional planning numbers for common Seville upgrades. Your real figure depends on size, materials, access and site prep, which we confirm on site.
| Upgrade | Typical directional range (installed) | Notes |
|---|---|---|
| Artificial turf lawn | About 8 to 15 dollars per sq ft | Pet turf and putting greens sit higher |
| Paver patio | About 18 to 30 dollars per sq ft | Travertine and porcelain at the top end |
| Travertine pool deck | About 20 to 35 dollars per sq ft | Around your existing pool, not the pool itself |
| Built-in outdoor kitchen | About 8,000 to 30,000+ dollars | Appliances and counter material drive the range |
How do you design a Seville backyard for a growing family?
Most Seville homeowners we meet want a yard the whole family actually uses, matching the community's water-park and family feel. That usually means a durable turf lawn with no mud or mowing for kids and dogs, a shaded patio and outdoor kitchen for entertaining, and often a backyard putting green or a fire-pit seating area. We zone the yard so play, dining and quiet spaces each have their place, keep turf and pavers draining away from the house, and tie everything into any existing pool deck. The result is one cohesive outdoor room that holds up to the Arizona sun and years of real family use, not a set of disconnected add-ons.